Jump to content

Guide ยท Murrieta

Plumber faucet replacement cost

A plumber-installed faucet runs about $200 to $700 in a national guide, with labor-only swaps of an owner-supplied faucet at $100 to $250. Repairs often cost less than replacing.

Cabinet cutaway with a new faucet on the sink deck, braided supply lines from stop valves and the drain.

The guide we read lists a plumber-supplied, plumber-installed faucet at $200 to $700, and $100 to $250 when you buy the faucet and pay for labor only. A repair on a dripping faucet runs $100 to $350 depending on valve type. These are national averages, so a local quote can differ. Related sink and disposal work is on the page for faucets, sinks, showers and disposals.

What is the usual price for a leaky faucet repair by a plumber?

The guide puts a overall drip or leak repair at $100 to $350, a cartridge replacement at $150 to $350 including the part, and a compression-valve repair on an older faucet at $100 to $200. Cartridge jobs take about 45 to 90 minutes, and compression washer work 30 to 60 minutes.

What pushes a repair toward the top: a cartridge that is hard to find, a body corroded by scale, or a stuck stop valve. If the repair price approaches half of a new faucet, replacing is the better choice, especially on a faucet with a worn finish.

Third-party estimates place Murrieta tap water in the moderately hard to hard range, so scale on cartridges is a common reason for returns. Your district's report gives a figure for your address. For the do-it-yourself route, see fixing a leaky faucet yourself.

What about shower cartridges and shower valves?

No source we could read in full gave prices for a shower valve or shower cartridge, so no numbers are quoted here. In general, swapping a cartridge is quick and the part costs little, while replacing the whole valve means opening the wall and costs much more. Ask for both options in writing.

Cartridge swap with the wall left closed beside a full valve body replacement through an opened wall.

How do you tell which one you need? A drip from the shower head or tub spout with the handle off points to the cartridge. A leak inside the wall, a seized handle or a body that is cracked points to the valve. Single-handle valves in homes built since the 1990s generally take a replaceable cartridge, which keeps the cost down if the brand is still made.

Related reading: repairing a leaky shower faucet, fixing a leaky bathtub faucet and a leaking pipe under a sink. A faucet drip can also add to your water bill; a dripping faucet and your water bill covers that.

What does a bathroom faucet cost to replace?

The guide lists a bathroom vanity faucet at $150 to $400 installed, with widespread models adding $50 to $100 over center-set ones. Labor alone is again $100 to $250. Bathroom jobs are often quicker than kitchen ones, but tight cabinets and corroded supply lines can slow them.

If your vanity top is stone, ask whether the faucet fits the existing holes. A different spread needs a different faucet or a new top, and that is not a plumbing fix. The faucet's finish and brand influence its price more than labor does.

Have the plumber include fresh supply lines and a check of the stop valves. Replacing a faucet without testing the valves invites a failure later.

What is the cost of a kitchen faucet replacement?

A kitchen pull-down or pull-out faucet runs $250 to $600 installed in the guide, and a plumber-supplied faucet of any kind $200 to $700. Labor alone, when you buy the faucet, is $100 to $250. Pull-down models take longer because of the hose routing under the sink.

What changes the total:

Factor Effect
Who buys the faucet Owner-supplied saves the plumber's markup
Faucet type Pull-down and touchless models take longer
Sink holes Extra holes need a cover plate or a deck plate
Old stop valves Seized valves add a repair or replacement
Disposal or dishwasher Connections beneath the sink get disturbed

The guide sets regional labor swings at roughly 20 percent either way. In a Murrieta home built since 2000, a straightforward swap is the usual case. Older homes may bring corroded supply lines, so have the plumber price new braided lines.

What does dishwasher installation by a plumber cost?

No readable source gave a figure, so none is quoted. Installing a dishwasher means a hot supply line, electricity, and a drain connection built with either an air gap or a high loop, so a plumber or an electrician may be needed. Get a written price listing what is included.

The kitchen may involve other work at the same visit: a new faucet, a disposal connection or a shutoff valve. Fitting a disposal and a dishwasher together shares the drain connection, so quote them as a package if you can. Our disposal repair hub covers the sink side, and the disposal installation service page the fitting.

To compare prices, submit a quote request giving the faucet type, whether you already have the new faucet, and a picture of the cabinet beneath the sink. We pass the request to local plumbing businesses, and those that accept requests pay this site a fee for the introduction; whichever one replies sets the price and does the work. The other services we handle are listed on the home page.

Common questions

Does buying the faucet myself cost less?

Usually yes, since you avoid the plumber's markup; the guide puts labor-only at $100 to $250, while a plumber-supplied faucet runs $200 to $700. The catch: ask whether the plumber will warranty the work on a faucet you bought, and make sure the model fits your sink holes.

How long does a faucet swap take?

A repair or cartridge job runs about 30 to 90 minutes per the guide. A full replacement commonly takes one to two hours, longer with a stuck valve or tight cabinet. The plumber will give a time frame before starting, and may add an hour for a pull-down hose.

Which questions should I put to a plumber before a faucet job?

Check whether the quote covers the faucet itself or only labor, plus new supply lines, stop valve checks, hauling away the old unit and a callout fee. If the job's labor and materials hit $1,000 or more, verify the business holds a California contractor license. Get the price written down.

Must an adult stay home during a faucet job?

Yes, the plumber needs an adult to open the door and approve the work, and that person should stay reachable in case a seized valve or some other extra turns up. Clear out the cabinet beneath the sink before the visit. The job is short, and the water stays shut off only briefly.

References

Last changed