Putting in a tankless unit costs more than exchanging one tank for another, and the extra comes from the surrounding work rather than the appliance. A gas model may need a larger gas line, fresh stainless venting routed out of a wall or the roof, and a condensate drain. An electric model needs heavy wiring and spare panel capacity. We print no fixed price. The page sits within water heater repair and replacement and shows what a quote should list.
Which items add up to a tankless installation price?
A quote adds up the unit, labor, gas or electric upgrades, venting, permit fees and hauling off the old tank. Extras can include isolation valves for flushing, a pressure relief valve, and a recirculation pump if you want hot water at the tap sooner. A quote that shows only one total hides which of these are included.
Ask for a line for each. The unit's price depends on brand, capacity and whether it is condensing. Labor depends on how hard the old heater is to remove and how far new lines run. The upgrade lines are the swing factor. A garage where the old tank sits next to an exterior wall and a gas stub is a quick job. A hall closet with no exterior wall and an old flue is not.
Ask too about warranties. The maker sets parts coverage, and the installer may add labor coverage. Registering the unit is usually the owner's job and may be required for the full warranty.
Why is a gas tankless install priced higher than a tank swap?
A tankless burner can draw far more gas than a tank heater does, which often leaves the existing gas line too small. The units also need venting rated for their exhaust, and condensing models need a condensate drain. Resizing the line for the appliance is gas piping work, and it needs a permit.
Gas piping jobs call for a California contractor license, so this is not for doing yourself. Should you ever smell gas, leave the building, then use the SoCalGas line, 1-800-427-2200, from outside, and dial 911 when someone is in danger. On the cost of line upgrades, read what a gas line costs. For the install steps see gas tankless water heater installation.
Some rural properties run on propane or electricity instead of piped natural gas. We have not verified which homes have natural gas service, so check with your supplier.
What changes for an electric tankless heater?
Electric tankless units draw large current, so the main cost item is often electrical: a dedicated breaker, heavy cable and, in some houses, a panel upgrade. The plumbing side is simpler, with no vent and no gas line. Ask an electrician how much spare capacity your panel has before you commit.
Because the electrical part is regulated work, it may be done by a separate trade and appear as a second quote. If you need the full picture, read electric tankless water heater installation. Also compare running costs, since electric units can cost more to run than gas in many places, but check current rates.
How does a tankless quote compare with a tank replacement?
Replacing a tank with another tank nearly always costs less to install, since the gas line, vent and location can stay put. A tankless unit may save floor space and give endless hot water, but it can take longer to pay back. Compare the whole picture, including expected life and maintenance.
For tank prices, water heater replacement cost and replacing a 50-gallon heater cover the usual sizes, and the tank versus tankless page can settle the choice. Tankless units need yearly flushing in hard water areas. Third-party estimates generally put Murrieta tap water at moderately hard to hard, so budget for that service.
Does a tankless water heater need a permit in Murrieta?
Yes. Changing a water heater generally requires a permit, and a gas tankless install adds gas and venting inspections. Within the City of Murrieta, the Building and Safety Division handles permits and lists 951-461-6062. Addresses in Wildomar, Riverside County and San Diego County use their own offices, so confirm for your street.
Usually the plumber pulls the permit and schedules the inspector, with the cost shown in the quote. Ask to see the permit number. Unpermitted work may cause trouble when you sell or claim insurance. California also requires earthquake bracing on water heaters, and the inspector looks for it.
Before signing, look up the contractor license on the state board website: CSLB, hiring a contractor.
What do big-box stores and independent plumbers charge differently?
Some stores sell heaters with an installation service, using contractors who bid the job, while a plumber quotes the unit and labor together. Package prices can look lower and then change after the site visit if your gas line, venting or panel needs work. Compare scopes, not headlines.
Ask any seller who will pull the permit, who removes the old tank, what happens if hidden work is found, and what is covered by the labor warranty. A written price that already includes a site check is firmer than one given from a catalog.
What are the other costs around a water heater?
Small parts are separate from the heater. An anode rod, a heating element, a thermocouple, a relief valve and a gas control valve are priced as repairs, and each is quoted on its own. Knowing them helps you decide whether to repair an aging tank or move to a new unit.
Read the guides on anode rod replacement, replacement elements, thermocouples and relief valves. If the tank is leaking, repair is usually not an option. A heater that leaks from its shell needs replacing.
A hot-water line that has failed under a slab is a plumbing repair, not a water heater cost. See slab leak repair cost for how that is priced.
Are there rebates or incentives?
Some districts and utilities offer rebates on efficient appliances, and programs change. We have not checked current offers for your address, so ask your water district, your gas or electric utility and the manufacturer. Which district bills you is on your water bill, such as Eastern Municipal Water District, Elsinore Valley or Rancho California Water District.
Do not count on a rebate in the budget until it is confirmed in writing. Ask whether the program needs a specific model, a permit number or pre-approval. Retailers and installers sometimes know the current list, but check it yourself.
How do you pick between quotes?
Pick the quote that lists every item: unit model, gas or electric work, venting, permit, haul-away, warranty and start date. If two quotes differ by a lot, the difference is almost always scope, not honesty or greed. Call both businesses and ask what each one includes.
We arrange the visit and nothing more. A local business comes out, writes up the quote, and pays us a fee for the request. Start at the price request page. Other jobs we arrange are on the Murrieta Creek Plumbing home page.
Common questions
What would a big-box store ask for fitting a hot water heater?
We cannot quote any store's price, and it changes. Big-box installation is usually bid by an outside contractor after a visit, so the final figure depends on gas, venting and permits. Ask for a written, itemized price, and check whether the permit and old-tank disposal are included.
How much do plumbers charge to replace a water heater?
The figure moves with the unit, the location and any code upgrades, and we will not invent a number. A good quote itemizes the heater, labor, permit, venting or pan upgrades and haul-away. Gather two or three quotes and compare them line by line. More detail is in our water heater replacement cost guide.
Does a tankless water heater pay off?
For homes that value space and a steady supply of hot water it can, yet lower bills take years to make up the higher install cost. Hot water use, gas or electric prices and maintenance all change the answer. Ask the plumber to compare both options for your house, using your own usage.
Do I need a new gas line for tankless?
A bigger line is often needed, since tankless units pull more gas at once. The unit's rating and the run length are what the plumber uses to size it. Permits apply, and the contractor must hold the right license. If gas is ever smelled, leave and call SoCalGas at once.
How many hours does a tankless install need?
A simple swap might fill most of a day. A first tankless install with new venting, gas line and wiring runs longer, and the permit inspection means another visit. The quote ought to state a start date and roughly how many hours you will be without water.
Last changed