Jump to content

Guide ยท Murrieta

What a 50 gallon water heater replacement costs

The 50 gallon tank is the usual size for a family of three to five, and its replacement price is the sum of the unit, the labor and the code items that come with it. This page breaks down the parts of the quote, with no invented dollar figures.

50 gallon tank in a drain pan with callouts for the relief valve, seismic strap and gas shutoff.

We have not read a published Murrieta price source we trust for a 50 gallon heater, so this page gives you no price range, and nobody can responsibly quote one without seeing your closet or garage. Instead you get the factors that move the price, which lets you compare two written quotes. For the broader view, go to water heater repair.

What goes into the price of a 50 gallon replacement?

Five pieces make up the total: the heater, the labor to remove the old one and set the new one, the connections and code parts (valves, flex lines, relief piping, a drain pan, bracing), the permit and inspection, and hauling away the old unit. Fuel type and access conditions move the total more than the brand does.

Have each plumber list those pieces on the quote. One lump figure in a bid conceals which pieces are missing. Common lines are a new gas flex connector or electric whip, a fresh discharge pipe and relief valve, a gas shutoff, a dielectric union, seismic strapping, a drain pan with a drain line, and an expansion tank where the system needs one.

Compared with a smaller unit, the gap is mostly the heater itself, because labor is similar. Standard sizes are in water heater replacement cost, and gas units have a separate page, gas water heater replacement cost.

Should you go tankless rather than buy another 50 gallon tank?

Usage and gas line decide it. Tankless costs more up front and needs correct gas sizing and venting, but ENERGY STAR gives a life expectancy of around 20 years for gas tankless, longer than a tank, and it takes less floor space. A tank installs more simply and for less. Neither choice is right for every home.

Compare the full installed cost and the upkeep. Tankless needs descaling in hard water, and third-party estimates rate Murrieta tap water moderately hard to hard. See tank versus tankless, gas tankless versus tank and tankless installation cost.

Does a 50 gallon heater fit in the old heater's spot?

Often it does, but measure. Compared with a 40, a 50 gallon tank is taller or wider, and some models are a squat "low boy" or a tall "high efficiency" style. The gap between the tank and the wall, the clearance in front for a burner or service, and the headroom under a ceiling or shelf all matter. Garage and closet installs can be tight.

Side view of a 50 gallon tank with dimension lines for wall gap and headroom.

California's plumbing code expects the relief valve to discharge to a safe place, and many installers set the heater in a drain pan with piping. That takes floor space. If the old heater sat on a raised platform, the new one should too where required. Ask the plumber to confirm clearances and platform height in writing.

A garage or utility closet is where many tract homes in Murrieta and Wildomar put the heater, whereas older houses may be set up differently. Photos sent with your request help the plumber price it, and a price request can include a picture of the unit and its label.

When is repairing cheaper than buying a new 50 gallon unit?

Repair wins when the heater is fairly young and one part, such as an element, thermostat, thermocouple or valve, has failed. Replacement wins over time if the tank leaks, the unit has outlived its expected 10 to 15 year life, or repairs keep piling up. Line up a repair quote against a replacement quote.

Useful pages: replacement elements, thermocouples, and heater lifespan and replacement timing. The plumber home page shows what else we arrange.

Is a 50 gallon gas heater priced differently from electric?

Yes. A gas 50 gallon tank needs a vent flue, gas piping and combustion air, so the job is longer and more safety-critical. An electric one needs a correctly sized 240 volt circuit and no flue, so labor is often simpler, though power costs and the home's panel capacity matter. Heat pump models cost more again.

Replacing one tank with an identical type is the easy case when the home already has a gas line and a vent. Switching fuel (gas to electric, or the other way) brings wiring or gas piping, venting changes and permit steps. Gas is expected to come from SoCalGas where your street has service, and some rural homes run on propane or electricity, so confirm what you have before you ask for quotes.

Never guess at gas work. On a gas smell, leave the building, use the SoCalGas line, 1-800-427-2200, from outside, and call 911 if you feel in danger. Contractors handle gas piping and venting, and the law expects a permit.

Does the job need a permit, and who gets it?

Replacing a water heater is generally a permitted job, and permitted work calls for a California contractor license, so the plumber usually files for the permit and books the inspection. Inspectors examine the gas connection, venting, relief valve, seismic strapping and sometimes the expansion tank.

Which office depends on your address. The City of Murrieta Building and Safety Division lists 951-461-6062. Wildomar addresses use the city's building counter, listed at 951-677-7751. Riverside County, listed at (951) 955-1800, generally covers French Valley, Winchester and Lakeland Village, and San Diego County covers Fallbrook, Rainbow and De Luz. These county numbers come from county listings, so confirm before you visit.

See that the quote shows the permit fee. A plumber who suggests skipping the permit to save money is a red flag. Without a permit, a home sale or an insurance claim can become complicated.

Common questions

How many hours does a 50 gallon replacement need?

Replacing a tank with the same type often takes a few hours, while changing fuel, venting or location takes longer. The steps are draining, disconnecting, setting, connecting, filling and testing, and the inspector may need a separate visit. The plan belongs on the quote, stated by the plumber.

Which questions come before I accept a 50 gallon heater quote?

Ask for the brand and model, how long the manufacturer's warranty runs and what it covers, and whether the permit, strapping, pan, expansion tank and haul-away are included. Also ask who handles the inspection, and what labor charges apply if something unexpected comes up. Get the answers in writing.

Does a 50 gallon tank cost more to run than a 40?

Slightly, in most cases, because a bigger tank holds more water to keep warm between uses. The efficiency rating on the yellow label tells you more than the size does. If your household rarely runs out of hot water on a 40, a 50 may simply be a larger bill with no benefit.

Can I buy the heater myself?

Sometimes, though the plumber may refuse to warrant a unit they did not supply, and a wrong model can mean a second trip. Ask before buying. Have the quote show the heater on its own line, which lets you set it fairly against store prices.

References

Last changed